AnonymousFox

//usr/share/doc/lynx-2.8.6/lynx_help/lynx_url_support.html

<!DOCTYPE html PUBLIC "-//IETF//DTD HTML 3.0//EN">
<HTML>
<HEAD>
<TITLE>URL Schemes Supported in Lynx</TITLE>
<LINK rev=made href="mailto:lynx-dev@nongnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>

<H1>URL Schemes Supported in Lynx</H1>

Lynx handles a number of URL types, that are enumerated below. For
more details about URLs (Uniform Resource Locators) see RFC1738:
<ul>
<li><a href="http://www.w3.org/Addressing/rfc1738.txt"
>http://www.w3.org/Addressing/rfc1738.txt</a>
<li><a href="ftp://ftp.rfc-editor.org/in-notes/rfc1738.txt"
>ftp://ftp.rfc-editor.org/in-notes/rfc1738.txt</a>
</ul>

Lynx resolves partial or relative URLs in documents with respect to
the BASE if one was specified, otherwise with respect to the document's
absolute URL, using the rules described in RFC1808:
<ul>
<li><a href="http://www.w3.org/Addressing/rfc1808.txt"
>http://www.w3.org/Addressing/rfc1808.txt</a>
<li><a href="ftp://ftp.rfc-editor.org/in-notes/rfc1808.txt"
>ftp://ftp.rfc-editor.org/in-notes/rfc1808.txt</a>
</ul>

and in subsequent drafts of the IETF:
<ul>
<li><a href="http://www.ics.uci.edu/pub/ietf/uri/"
>Uniform Resource Identifiers (URI) Working Group</a>
</ul>

When entering a URL on the command line to be used as the
startfile, or at the prompt for a 'g'oto entry, a
partial host field can be used and the scheme field can be omitted if
the scheme and fully qualified domain name can be constructed internally
by using the URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES definitions in
the Lynx configuration file. See the explanation of those definitions
and their use in your lynx.cfg. For example, wfbr will
be treated as http://www.wfbr.edu/, and wfbr/dir/lynx
will be treated as http://www.wfbr.edu/dir/lynx, but
gopher.wfbr.edu/11/_fileserv/_lynx will be treated as
gopher://gopher.wfbr.edu/11/_fileserv/_lynx. For files or
directories on the local host, a tilde (~) is expanded to
the path of the account's login directory, e.g., ~/foo will
be expanded to file://localhost/your/login/directory/foo.
The tilde expansion is done homologously on Unix and VMS. On VMS,
Lynx also will expand any file or directory spec recognizable to
DCL into a valid URL, e.g., [] will be expanded to
file://localhost/current/default/directory. These expansions
are SOLELY for startfile or 'g'oto entries!
Any partial or relative URLs within HTML documents are resolved
according to the rules specified in RFC1808 and subsequent IETF drafts.
<HR>

<H2><a name="http_url">The http and https URLs:</a></H2>

Lynx handles http URLs exactly as specified in RFC1738. The format
is:
<pre>
 http://host:port/path?searchpart#fragment
</pre>
where :port is optional and defaults to :80,
/path if present is a slash-separated series of symbolic
elements, and ?searchpart if present is the query for an ISINDEX
search or the content of a FORM with METHOD="GET". The #fragment
field if present indicates a location in the document to seek for display,
based on a NAME-ed anchor or an ID attribute within the document, and is
technically an instruction rather than part of the URL. Lynx will treat
ID attributes as NAME-ed anchors for all tags in the BODY of a document
which can correspond to positions in the rendering of the document.

The https URL has the same format, but the default port is :443.
<HR>

<H2><a name="telnet_url"
>The telnet, tn3270, and rlogin URLs:</a></H2>

A telnet URL generally results in Lynx spawning a telnet
session. Lynx implements the complete telnet URL scheme, i.e.:
<pre>
 telnet://user:password@host:port
</pre>

The user and/or :password fields may be omitted, and
the @ should be omitted if neither is present. The port defaults
to :23 when omitted in the URL.

A tn3270 or rlogin URL is specified equivalently,
and similarly spawns a tn3270 or rlogin session. The actual behavior
is dependent on the TCP-IP software installed on the local and target
hosts.

It is unwise to include the :password field except for
URLs which point to anonymous or other public access accounts, and
for most TCP-IP software you will be prompted for a password whether
or not one was included in the URL.
<HR>

<H2><a name="gopher_url">The gopher URL:</a></H2>

The gopher URL takes the form:
<pre>
 gopher://host:port/gopher-path
</pre>
where :port is optional and defaults to :70, and the
/gopher-path is opaque (not fully equivalent to the
slash-separated series of symbolic elements of http paths) as explained
in RFC1738. Typically, the gopher-path consists of a
<A HREF="keystrokes/gopher_types_help.html">gophertype</A>
indicating the file or service type (e.g., 0 or I for
plain text or an image, respectively, 7 for a search, or 1
for a directory), followed by a platform-specific selector. Any
reserved characters in the selector should be hex escaped (%hh),
including slashes, although hex escaping of slashes is not required by Lynx
in gopher URLs.

Lynx does not overtly support the gopher+ protocol, and does not
represent itself as gopher+ capable when communicating with gopher
servers. Lynx might transmit any (hex-escaped-tab-separated) extended
gopher+ fields in a URL if an author included them in a document, but is
likely to mishandle what the gopher server returns in such cases, and would
not generate and transmit them itself. For pre-formed URLs to submit gopher
searches, it may be better to use a ? rather than hex-escaped tab
(%09) as the separator for the searchpart in the
selector, e.g.: 
gopher://gopher.wfbr.edu/77/_shell/search.shell%20/_shell/walker?lynx*
Lynx will handle the %09 if you use that instead of ?,
but other WWW clients may mishandle it.

For the gophertype which signifies HTML (h), if the
selector begins with GET%20/ Lynx will convert the gopher
URL to an http URL, e.g.: 
<pre>
gopher://www.wfbr.edu:80/hGET%20/
</pre>
will become: 
<pre>
http://www.wfbr.edu/
</pre>
The port field will be retained if it is not :80, and will default
to :70 if it was defaulted originally. These conventions were
adopted during development of the University of Minnesota gopher software
to facilitate the offering of links to MIME-capable http servers in the
listings returned by gopher servers, but should be considered Lynxisms
and UMN Gopherisms.
<HR>

The file URL is used to retrieve files or generate a directory listing
on the local host. The host field can be localhost or a domain
name for the local host: 
<pre>
file://localhost/path
</pre>
If you do not use localhost or a domain name for the local host,
Lynx will substitute ftp:// for file:// and treat it
as an ftp URL.

The /path is treated as originating at the root, unless
you include a tilde (~), e.g.:
<pre>
 file://localhost/~/foo will be converted to:
 file://localhost/your/login/directory/foo
</pre>
The latter feature is a Lynxism, is done homologously on Unix and VMS,
and should be used ONLY in local documents intended for Lynx.

On VMS, the first element of the path, if not a tilde, is assumed to
be a device, e.g.:
<pre>
 file://localhost/www_root/directory/filename.suffix
</pre>
should be used for: www_root:[directory]filename.suffix 
If you are unsure how to specify a file URL in local documents on
VMS, invoke Lynx with the desired file or directory as the
startfile using any spec acceptable to DCL, and then
use the showinfo command (=) to see the file
URL which Lynx created for it.
<HR>

The ftp URL has the general format:
<pre>
 ftp://host:port/path;type=[D,I, or A]
 ftp://username@host:port/path;type=[D,I, or A]
</pre>

The default port is :21 and the default username
is anonymous. If username is included,
Lynx will prompt you for the password. For anonymous ftp, Lynx uses your
personal_mail_address (user@host) as the password
if it has been defined via the 'o'ptions menu. Otherwise,
Lynx uses the dummy password WWWUser.
(A password can also be embedded in the URL, by replacing
username with username:password. This is strongly
discouraged for 'real' passwords that must be kept secret, since URLs
with the completely unencrypted password may show up on the
screen, in HISTORY and LIST pages etc., and may even become visible to
remote sites for example through Referer headers.)
Do not include the @ if neither username nor
:password is included.

The ;type= parameter can be used with value D,
I, or A to force handling of the URL as, respectively,
a directory listing, binary file, or ASCII file. The Lynx ftp gateway
normally determines this itself, but the parameter can be used if the
internal procedure draws an incorrect inference about the nature of
the ftp URL.

The /path is treated according to RFC1738 for VMS
and VM/CMS ftp servers. The lead slash (/) is treated purely
as a separator, not as a designator for the root, and the path
string if present is treated as in or under the login directory. For
VMS ftp servers, if you wish to have the first element treated as a
device rather than file or subdirectory name, begin it with a hex-escaped
slash (%2f), e.g.: 
<pre>
ftp://user@myhost/%2fsys$common/syshlp
</pre>
can be used for a listing of sys$common:[syshlp] 
Also, on VM/CMS ftp servers, if the path string begins
with vmsysu%3a it receives special handling as an SFS
path, e.g.:
<pre>
 ftp://ubvm.cc.buffalo.edu/vmsysu%3alistserv.webshare
</pre>

For Unix and Unix-emulation ftp servers, RFC1738 is not respected
and the lead slash is treated as the root, i.e., the /path is
handled equivalently to that in file URLs. The distinction is
irrelevant for anonymous ftp, but matters when using ftp for
non-anonymous accounts. If you are using ftp with a Unix server and
do wish to get a listing of the login directory or have the path
string treated as a file or path under the login directory, include a
tilde (~) as for <a href="#file">file</a> URLs, e.g.:
<pre>
 ftp://user@myhost/~
</pre>
<HR>

The wais URL is used to retrieve resources using the Wide Area Information
System protocol. The format is:
<pre>
 wais://host:port/database
 wais://host:port/database?wais_query
 wais://host:port/database/wais_type/wais_path
</pre>
where :port defaults to :210

Direct wais support is built into Lynx for VMS, and can be compiled
into Lynx on Unix.

If only a database is indicated in the URL, Lynx returns
an ISINDEX cover page for searching that database, and will
submit your search with the wais_query appended. Lynx will
convert the server's reply into a hit list with URLs that include the
wais_type and wais_path for retrieving items from
the hit list.
<HR>

<H2><a name="news_url"
>The news, nntp, and snews URLs:</a></H2>

The news and nntp URLs are handled by Lynx as specified in RFC1738, but
for compatibility with other clients, Lynx allows inclusion of host and
port fields in news URLs, which properly should be used only in
nntp and snews URLs. If not included in news URLs, Lynx will use the nntp
server pointed to by the NNTPSERVER environment variable or configuration
symbol (see lynx.cfg), with default port :119. A host field must
be included in nntp URLs, and the port field is optional with the same
default.

If the URL requires authentication,
lynx will prompt you for the username and password.
These are cached during a session,
for reuse on the same host.
If $HOME/.newsauth exists,
lynx initializes its cache from this file.
The .newsauth file contents are one line per entry:
hostname, password and username
(in that order) separated by a space.

The formats are: 
<pre>
 news:newsgroup (retrieves list of messages in newsgroup)
 news:messageID (retrieves the message)
 news:* (retrieves list of all available newsgroups)
 nntp://host:port/newsgroup
 nntp://host:port/messageID
 nntp://host:port/*
</pre>
(snews same as nntp, but the default port is :563)

The messageID is the message's unique identifier, consisting
of an identification string and the host of origin for the message
(ident_string@origin_host).

Lynx also supports wildcarding via an asterisk for listings of news
hierarchies or sub-hierarchies, e.g.:
<pre>
 news:comp.infosystems.*
 nntp://host:port/comp.infosystems.*
</pre>
(snews same as nntp, but the default port is :563) 
This is not in RFC1738 and may not be supported by all other clients.

Lynx allows you both to reply to the author of a news message
via email, and, if news posting has been enabled, to send a followup
message to the newsgroup (see <a href="#newspost">newspost, newsreply,
snewspost, snewsreply</a>).

Lynx converts any strings in news messages which appear to be a URL
with a supported scheme into a link for accessing that URL.

Lynx also supports the newsgroup and message number URL scheme: 
<pre>
 news:newsgroup/startNo-endNo (lists message range in newsgroup)
 news:newsgroup/messageNo (retrieves the message by number)
 nntp://host:port/newsgroup/startNo-endNo
 nntp://host:port/newsgroup/messageNo
</pre>
(snews same as nntp, but the default port is :563) 
Use of this scheme is not recommended, because the message numbers
are specific to each nntp server, unlike the unique identifiers for
news messages.
<HR>

<H2><a name="newspost_url"
>The newspost, newsreply, snewspost, and
snewsreply URLs:</a></H2>

When Lynx receives group listings or articles via news,
nntp or snews URLs, it also checks whether the
nntp server supports posting from the Lynx user's site, and if so,
includes links for posting new messages to that server, or for posting
followups (replies) to previously posted messages. RFC1738, and IETF
URL drafts through this release of Lynx, do not include any schemes
for posting to news groups. Lynx has long supported newspost and
newreply URL schemes for posting new messages or sending followups,
respectively, to standard nntp servers, with default port :119.
Lynx now also supports homologous snewspost and snewsreply URLs for use
with SSL capable nntp servers.

The formats are:
<pre>
 newspost://host:port/newsgroup(s)&nbsp;&nbsp;(post a new message)
 newsreply://host:port/newsgroup(s) (post a followup message)
</pre>
(snewspost and snewsreply have the same formats, but the default port is
:563)

If the host field is omitted, it defaults to that pointed to by the
NNTPSERVER configuration or environmental variable. Inclusion of at
least one newsgroup in the URL is required, and additional groups can
be specified as a comma-separated list. Wildcarding of newsgroup names
is not supported for these URLs. For newsreply and snewsreply URLs, if
an external editor has been defined via the Options Menu, the
user is offered an option to include the currently displayed document,
which presumably is a news article with a followup link that
was activated, and if confirmed, each line of that document is prefixed
with a right-angle-bracket. The user is expected to edit such an inclusion
so that only the passages relevant to the followup message are retained.

These URLs can be used as command line startfiles (in which case, Lynx
will exit after posting the message, and the newreply or snewsreply URLs
degrade to newspost or snewpost URLs, respectively). They also can be used
as HREF attribute values in any HTML document homologously to <a
href="#mailto">mailto</a> URLs, with the qualification that they presently
are supported only by Lynx.
<HR>

<H2><a name="mailto_url">The mailto URL:</a></H2>

The mailto URL is used to provide links that when activated can be
used to send a comment or the content of a FORM to an Internet email
address (user@host). The format is:
<pre>
 mailto:user@host
</pre>

The description of the mailto URL in RFC1738 has been interpreted by
some as allowing only a single recipient, but Lynx invented the mailto URL,
has always supported a series of user@host addresses as a comma-separated
list, and still does. For compatibility with Explorer, Lynx also accepts
a semi-colon-separated list.

For compatibility with Netscape, Lynx parses any
?subject=The%20Subject appended to the URL, trims the URL
at the ?, and uses the value as the default Subject: for
the message or FORM content mailing. This is not recommended practice.
The preferred way to indicate the default Subject: for a LINK or Anchor
with a mailto HREF, or a FORM with a mailto ACTION, is via a TITLE
attribute with the subject string as its value, e.g.:
<pre>
 &lt;LINK REV="made"
 HREF="mailto:me@myhost,her@herhost" TITLE="The Subject"&gt;

&lt;A HREF="mailto:user@host" TITLE="The Subject"&gt;...&lt;/A&gt;

&lt;FORM METHOD="post" ENCTYPE="text/plain"
 ACTION="mailto:WebMaster@host" TITLE="The Subject"&gt;
 ...
 &lt;/FORM&gt;
</pre>

Note that a TITLE attribute for FORM is now included in the HTML
specifications. Some clients use a SUBJECT attribute for this purpose
in FORM tags, and Lynx recognizes that as a synonym for TITLE.

Lynx also will process any to=address(es),
cc=address(es), keywords=word_list and/or
body=message fields in ?searchpart tack-ons to mailto
URLs. The to and/or cc values can be single addresses,
or comma- or semi-colon-separated lists of addresses. All addresses,
and any body values, will be offered for approval by the user
before proceeding with a mailing. Any other name=value pairs in the
?searchpart will be ignored. Also, if the mailto URL is the
ACTION for a FORM, any body in a ?searchpart tack-on
will be ignored, because the body of the mailing must be constructed
solely from the the FORM's content. Lynx expects multiple name=value
pairs in a ?searchpart tack-on to be separated by ampersands,
as in the original Netscape implementation, and in an equally ill-advised
IETF draft of that implementation (<a
href="ftp://ftp.isi.edu/internet-drafts/draft-hoffman-mailto-url-03.txt"
>draft-hoffman-mailto-url-03.txt</a>). These should be represented as
entities (&amp;amp;) in the HTML markup. This functionality
is generally desired, but the IETF backward compatibility principal
normally would lead to a new scheme being used (e.g., mail:, or
smtp:), rather than breaking mailto: implementations.

If ENCTYPE="text/plain" is specified for a FORM with a mailto
ACTION, Lynx will not hex escape the name=value pairs of the FORM's content,
and will use physical newlines instead of '&amp;' or ';'
to separate the pairs, so that the content will be readable directly.
Otherwise, Lynx will mail the content with the default:
<pre>
 ENCTYPE="application/x-www-form-urlencoded" ('&amp;' separates pairs)
</pre>
or:
<pre>
 ENCTYPE="application/sgml-form-urlencoded" (';' separates pairs)
</pre>
if the latter was indicated.

Note that when mailing FORM content Lynx wraps any lines longer than 78
characters, to avoid buffer overflows in mail software and to ensure reliable
transmission across gateways. If the ENCTYPE was not text/plain,
any script which decodes the mailed content should ignore the physical
newlines and recognize only hex escaped newline characters as intended
to be present in the decoded content.

If the mailto URL is not the ACTION for a FORM, and if an external
editor has been defined via the Options Menu, the user is offered
an option to include the currently displayed document. If this option is
accepted, each line of that document is prefixed with a right-angle-bracket,
and the prefixed inclusion should be trimmed by the user to just those
passages relevant to the message which will be sent.
<HR>

<H2><a name="finger_url">The finger URL:</a></H2>

Lynx has full support for the finger protocol, but a format for finger
URLs has not yet been adopted by the IETF.  The formats supported by Lynx
therefore include every possibility not inconsistent with RFC1738,
including:

<pre>
 finger://host finger://@host
 finger://host/ finger://@host/
 finger://host/%2fw finger://@host/w
 finger://host/w finger://host/w/
 finger://host/username[@host] finger://username@host
 finger://host/username[@host]/ finger://username@host/
 finger://host/w/username[@host] finger://username@host/w
 finger://host/%2fw%20username[@host] finger://host/username[@host]/w
 finger://host/w/username
</pre>

Activating a finger URL will send a request to the finger server via
port 79 on the host specified. You can include :79 in the URL,
but no other value is allowed. The /w or /%2fw is used
to request a full report for finger servers which support it, and is not
case sensitive (i.e., can be /W or /%2fW). Any strings
in the report which appear to be a URL with a supported scheme will be
converted into a link for accessing that URL.

An alternative way to access finger servers is via gopher URLs with
port 79 and the plain text (0) gophertype specified: 
gopher://host:79/0 
Lynx will handle such URLs equivalently to overt finger URLs, including
creation of links for any strings which appear to be supported URLs.
<HR>

The cso URL is intended to provide a gateway to CSO/PH (QI) servers.
The requests are made on port 105 by default (:105), with the
following overt cso URL format: 
<pre>
cso://host
</pre>

You also can use a gopher URL format with port 105 and the CSO
(2) gophertype specified:
<pre>
 gopher://host:105/2
</pre>

Lynx will parse the stream returned by the server for the above
URLs and create a FORM for submitting additional requests (searches)
to the server. Any strings in the reports returned for these requests
(searches) which appear to be a URL with a supported scheme will be
converted into a link for accessing that URL.
<HR>

Lynx provides built-in support for bibliographic protocol (BibP).
BibP links are links to published works such as books or journal articles,
without a predefined server. BibP links are intended for resolution
by a local bibhost server (http://bibhost/) if it exists. Otherwise,
resolution is performed by a document-specified server or a known global
server.

<H2><a name="exec_url">The lynxexec and lynxprog URLs:</a></H2>

If execution of spawned commands has been enabled in your Lynx image, the
lynxexec and lynxprog URLs can be used to execute arbitrary system commands
or invoke system utilities. Any system command and associated switches
or qualifiers can be used, with the syntax appropriate for a shell running
Lynx on Unix, or for DCL on VMS, e.g.:
<pre>
 lynxexec:dir/date/size foo:[blah] (VMS)
 lynxexec:ls -l /foo/blah (Unix)
 lynxprog:news
</pre>
(Note, however, that restrictions on acceptable commands or utilities
may be imposed by the system administrator.)

You optionally can include //localhost/ in the URL, between the
scheme field and the command, but that is always implied. The lynxexec
and lynxprog URLs differ only in that with lynxexec you are prompted to
enter RETURN before Lynx clears the screen and restores the
previously displayed document, so that you can read any screen output
generated by the spawned command, whereas no such pause is imposed upon exit
from the utility invoked via lynxprog.

These are Lynxisms and should be used only in local documents intended
solely for Lynx.
<HR>

<H2><a name="cgi_url">The lynxcgi URL:</a></H2>

The lynxcgi URL is implemented only on Unix, can be used as the
ACTION for a FORM, and if enabled in your Lynx image has the format:
<pre>
 lynxcgi://localhost/path_to_CGI_script
</pre>
where //localhost is optional and always implied;
the full path should be specified, as `~' is not recognized;
if the script is in the directory Lynx was started from,
the simple file name is adequate. The output of the script
should be text/html and is rendered and displayed by Lynx.
Restrictions on use of lynxcgi and on acceptable paths can be imposed
in userdefs.h and lynx.cfg, qv.

This is a Lynxism and should be used only in local documents intended
solely for Lynx, or for limited local testing of CGI scripts without an
http server.
<HR>

<H2><a name="ncftp_url">The NcFTP URL:</a></H2>

Lynx recognizes the NcFTP-style ftp URL, e.g.,
<pre>
	<cite>ftpHost</cite>:<cite>fileSpecification</cite>
</pre>
for example
<pre><code>
	ftp.gnu.org:/pub/gnu
</code></pre>
<HR>

<H2><a name="internal_url">The LYNXfoo internal URLs:</a></H2>

Lynx uses a variety of private URL schemes for communication among its
internal modules. They start with uppercase letters <code>LYNX</code>
by convention, although, as input, URL schemes are recognized in a
case-insensitive manner.

As you discover what they are, and are tempted to use them externally in
documents, you should resist that temptation:
<UL><LI>There already is too much browser-specific markup around...
<LI>The schemes, or their meanings, may change between Lynx versions.
<LI>Even if a scheme stays the same, some aspect of its behavior may
 be modified without notice, or the context in which it is allowed
 may change.
<LI>If it doesn't work as expected when used outside of the intended
 purpose, don't expect anyone to "fix" it.
</UL>

For example, tempting though it might be, do not use these:
<pre>
 Return to your &lt;A HREF="LYNXHIST:0"&gt;Startfile&lt;/A&gt;
 Review your &lt;A HREF="LYNXKEYMAP:"&gt;Keymap&lt;/A&gt;
</pre>
(No, they won't do any harm. Yes, they work. But don't rely on it.)

If you must try one, the second is OK from the command line: 
<pre>
 lynx LYNXKEYMAP:
</pre>
But within Lynx, use the 'K' keystroke command.
Sometimes it may be convenient to use a private scheme with
'g'oto, as in:
<pre>
 g LYNXMESSAGES:
 g LYNXCOMPILEOPTS:
 g LYNXCFG:
</pre>
But again, there usually is a way in which those special pages are
meant to be reached that is more convenient.
</BODY>
</HTML>