AnonymousFox

//etc/rc6.d/K99cpuspeed

#!/bin/sh

# the following is the LSB init header see
# http://www.linux-foundation.org/spec//booksets/LSB-Core-generic/LSB-Core-generic.html#INITSCRCOMCONV
#
### BEGIN INIT INFO
# Provides: cpuspeed
# Should-Start: 
# Default-Start: 1 2 3 4 5
# Short-Description: processor frequency scaling support
# Description: This script enables/disables processor frequency
#              scaling support, either using the cpuspeed daemon
#              or in-kernel frequency scaling support
### END INIT INFO

# the following is the chkconfig init header
#
# cpuspeed: processor frequency scaling support
#
# chkconfig: 12345 13 99
# description: Run dynamic CPU speed daemon and/or load appropriate
#              cpu frequency scaling kernel modules and/or governors
#

# Source function library.
. /etc/rc.d/init.d/functions

prog="cpuspeed"

[ -f /usr/sbin/$prog ] || exit 5

# Get config.
if [ -f /etc/sysconfig/$prog ]; then
  . /etc/sysconfig/$prog
fi

cpu0freqd=/sys/devices/system/cpu/cpu0/cpufreq
globfreq='/sys/devices/system/cpu'
cpufreq="${globfreq}/cpufreq"
cpus="${globfreq}/cpu[0-9]*"
testpat="${cpus}/cpufreq/scaling_driver"
lockfile="/var/lock/subsys/$prog"
xendir="/proc/xen"
logger="/usr/bin/logger -p info -t $prog"
IGNORE_NICE=${IGNORE_NICE:-0}
module_loaded=false

some_file_exist() {
  while [ "$1" ] ; do
    [ -f "$1" ] && return 0
    shift
  done
  return 1
}

governor_is_module() {
  # Check to see if the requested cpufreq governor
  # is provided as a kernel module or not
  module_info=`/sbin/modinfo cpufreq-${governor} > /dev/null 2>&1`
  return $?
}

is_p4_clockmod() {
  if [ `/sbin/lsmod | grep -c -w "p4.clockmod"` -ge 1 -a -d "/sys/devices/system/cpu/cpu0/thermal_throttle" ]; then
    return 0
  fi
  return 1
}

governor_module_loaded() {
# Check to see if we have a module loaded for
# the current cpufreq governor
  if [ -e ${cpu0freqd}/scaling_governor ]; then
    governor=`cat ${cpu0freqd}/scaling_governor`
  else
    governor="none"
  fi
  if [ "${governor}" != "none" -a `/sbin/lsmod | grep -c -w "cpufreq.${governor}"` -ge 1 ]; then
    return 0
  fi
  return 1
}

adjust_cpufreq() {
  # First arg is a param under $cpu/cpufreq/
  # Second arg is the value you want to set that param to
  if $(echo ${1} | grep -qE '(threshold|ignore_nice_load)'); then
    [ -f $cpufreq/$1 ] && echo $2 > $cpufreq/$1
  else
    for cpu in ${cpus}; do
      [ -f $cpu/cpufreq/$1 ] && echo $2 > $cpu/cpufreq/$1
    done
  fi
}

start_cpuspeed() {
  echo -n $"Starting $prog: "
  # cpuspeed daemon thresholds are specified as idle percentages,
  # cpufreq modules as busy percentages, so we need to do some
  # math here for use of unified config...
  # DOWN_THRESHOLD doesn't mean exactly the same thing for
  # cpuspeed as it does for the cpufreq governors, but close
  # enough, and if not specified, we use same defaults as governors.
  if [ -n "$UP_THRESHOLD" ]; then
    let UP_THRESHOLD=100-$UP_THRESHOLD
  else
    UP_THRESHOLD=20
  fi
  if [ -n "$DOWN_THRESHOLD" ]; then
    let DOWN_THRESHOLD=100-$DOWN_THRESHOLD
  else
    DOWN_THRESHOLD=80
  fi
  OPTS="$OPTS -r -p $UP_THRESHOLD $DOWN_THRESHOLD"
  if [ -n "$MIN_SPEED" ]; then
    OPTS="$OPTS -m $MIN_SPEED"
  fi
  if [ -n "$MAX_SPEED" ]; then
    OPTS="$OPTS -M $MAX_SPEED"
  fi
  if [ "$IGNORE_NICE" -eq 0 ]; then
    OPTS="$OPTS -n"
  fi
  daemon $prog -d $OPTS
  RETVAL=$?
  return $RETVAL
}

stop_cpuspeed() {
  if [ -n "`pidof $prog`" ]; then
    echo -n $"Stopping $prog: "
    killproc $prog -USR1
    killproc $prog -INT
  fi
  if [ -n "`pidof $prog`" ]; then
    killproc $prog
  fi
  RETVAL=$?
  return $RETVAL
}

start() {
  if [ $(id -u) -ne 0 ]; then
    echo -n "Insufficient privileges to start cpuspeed service: "
    failure; echo
    return 4
  fi
  if [ ! -f $lockfile ] && [ ! -d "$xendir" ]; then
    cpu_vendor=$(awk '/vendor_id/{print $3}' /proc/cpuinfo | tail -n 1)
    cpu_family=$(awk '/cpu family/{print $4}' /proc/cpuinfo | tail -n 1)
    if ! some_file_exist $testpat ; then
      # Attempt to load scaling_driver if not loaded
      # but it is configured
      if [ -n "$DRIVER" ]; then
        /sbin/modprobe "$DRIVER"
      elif [ -d /proc/acpi ]; then
        /sbin/modprobe pcc-cpufreq 2> /dev/null
	if [ ! -d ${cpu0freqd} ]; then
	  /sbin/modprobe -r pcc-cpufreq 2> /dev/null
      	  if [ "$cpu_vendor" == AuthenticAMD ] && [ "$cpu_family" -ge 7 ]; then
            # Try loading powernow-k8 if this is an AMD processor,
            # family 7 or greater (Athlon XP/MP was family 6)
            pk8m=$(/sbin/modinfo powernow-k8 > /dev/null 2>&1)
            if [ "$?" -eq 0 ]; then
              /sbin/modprobe powernow-k8 2> /dev/null
              [ -d ${cpu0freqd} ] || /sbin/modprobe -r powernow-k8 2> /dev/null
            fi
	  else
            # use ACPI as a fallback 
            /sbin/modprobe acpi-cpufreq 2> /dev/null
            # if even ACPI didn't work, remove it
            # and then next test will bail out.
            [ -d ${cpu0freqd} ] || /sbin/modprobe -r acpi-cpufreq 2> /dev/null
          fi
	fi
      fi
      if [ ! -d ${cpu0freqd} -a "$cpu_vendor" == GenuineIntel ]; then
        # last-ditch effort for Intel proc boxes, try our neutered p4-clockmod
        # to get at least passive cooling support (no clock changes)
        /sbin/modprobe p4-clockmod 2> /dev/null
        [ -d ${cpu0freqd} ] || /sbin/modprobe -r p4-clockmod 2> /dev/null
      fi
    fi

# If we get this far with no driver, we must have no scaling.
    # We're doomed.
    [ ! -f ${cpu0freqd}/scaling_driver ] && return 6

# Okay, we have a driver, carry on...
    drv=`cat ${cpu0freqd}/scaling_driver`

# Figure out default governor to use
    case "$drv" in
      centrino|powernow-k8|pcc-cpufreq|acpi-cpufreq|e_powersaver)
        default_governor=ondemand
        ;;
      p4-clockmod)
        # not actually a governor, we want to bail without doing either
	# in-kernel scaling or starting up the cpuspeed daemon in this case
        default_governor=p4passive
        ;;
      intel_pstate)
        default_governor=powersave
        echo "CPU states managed by intel_pstate; use cpupower for configuration."
        $logger "CPU states managed by intel_pstate; use cpupower for configuration."
        ;;
      *)
        default_governor=userspace
        ;;
    esac
    governor=${GOVERNOR:-${default_governor}}

if [ "${governor}" == "p4passive" ]; then
      echo -n "Enabling p4-clockmod driver (passive cooling only): "
      success; echo
      return 0
    fi

# Load governor module, if need be, and validate
    governor_is_module && /sbin/modprobe cpufreq-${governor}
    if [ `grep -c -w ${governor} ${cpu0freqd}/scaling_available_governors` -ge 1 ]; then
      $logger "Enabling ${governor} cpu frequency scaling governor"
    else
      $logger "Invalid governor \"${governor}\" specified, falling back to ${default_governor}"
      governor_is_module && /sbin/modprobe -r cpufreq-${governor}
      governor=${default_governor}
      governor_is_module && /sbin/modprobe cpufreq-${governor}
    fi

# Set governor
    adjust_cpufreq scaling_governor ${governor}

# Run cpuspeed daemon for userspace gov, kernel ones otherwise
    if [ "${governor}" == "userspace" ]; then
      start_cpuspeed
      RETVAL=$?
    else
      if [ -n "$MIN_SPEED" ]; then
        adjust_cpufreq scaling_min_freq $MIN_SPEED
      else
        adjust_cpufreq scaling_min_freq 0
      fi
      if [ -n "$MAX_SPEED" ]; then
        adjust_cpufreq scaling_max_freq $MAX_SPEED
      else
        adjust_cpufreq scaling_max_freq `cat $cpu0freqd/cpuinfo_max_freq`
      fi
      if [ -n "$UP_THRESHOLD" -a ${governor} == "ondemand" ]; then
        adjust_cpufreq ondemand/up_threshold $UP_THRESHOLD
      fi
      if [ -n "$DOWN_THRESHOLD" -a ${governor} == "conservative" ]; then
        adjust_cpufreq conservative/down_threshold $DOWN_THRESHOLD
      fi
      if [ "$IGNORE_NICE" -eq 1 -a ${governor} == "ondemand" -o ${governor} == "conservative" ]; then
        adjust_cpufreq ${governor}/ignore_nice_load $IGNORE_NICE
      fi
      echo -n "Enabling ${governor} cpu frequency scaling: "
      success
      RETVAL=0
    fi
    echo
    # Technically, not quite right in non-cpuspeed daemon
    # cases, but close enough to indicate that we're
    # doing some sort of cpu frequency scaling.
    [ $RETVAL = 0 ] && touch $lockfile
  else
    if [ -d "$xendir" ]; then
      $logger "CPU Frequency scaling is currently not supported on xen kernels"
    fi
    return 0
  fi
  return $RETVAL
}

stop() {
  if [ $(id -u) -ne 0 ]; then
    echo -n "Insufficient privileges to stop cpuspeed service: "
    failure; echo
    return 4
  fi
  is_p4_clockmod && p4status="true"
  if [ "$p4status" == "true" -a "x${GOVERNOR}" == "x" ]; then
    echo "p4-clockmod passive cooling support cannot be truly stopped"
  fi
  [ ! -f ${cpu0freqd}/scaling_driver ] && return 0
  drv=`cat ${cpu0freqd}/scaling_driver`
  governor_module_loaded && module_loaded=true
  if [ "${drv}" != "intel_pstate" -a "${governor}" != "userspace" ] ||
      [ "${drv}" == "intel_pstate" -a "${governor}" != "powersave" ]; then
    echo -n "Disabling ${governor} cpu frequency scaling: "
    $logger "Disabling ${governor} cpu frequency scaling governor"
    for cpu in ${cpus}; do
      if [ "${drv}" == "intel_pstate" ]; then
        echo powersave > $cpu/cpufreq/scaling_governor
      else
        echo userspace > $cpu/cpufreq/scaling_governor
        cat $cpu/cpufreq/cpuinfo_max_freq > $cpu/cpufreq/scaling_setspeed
      fi
    done
    if [ $module_loaded == true ]; then
      /sbin/modprobe -r cpufreq-${governor}
    fi
    success
    RETVAL=0
  else
    stop_cpuspeed
    RETVAL=$?
  fi
  echo
  [ -n "$DRIVER" ] && /sbin/modprobe -r $DRIVER
  [ $RETVAL = 0 ] && RETVAL=$?
  [ $RETVAL = 0 ] && rm -f $lockfile
  return $RETVAL
}

reload() {
  if [ $(id -u) -ne 0 ]; then
    echo -n "Insufficient privileges to stop cpuspeed service: "
    failure; echo
    return 4
  fi
  governor_module_loaded && module_loaded=true
  if [ "${governor}" == "userspace" ]; then
    failure; echo
    return 3
  else
    if [ -n "$MIN_SPEED" ]; then
      adjust_cpufreq scaling_min_freq $MIN_SPEED
    fi
    if [ -n "$MAX_SPEED" ]; then
      adjust_cpufreq scaling_max_freq $MAX_SPEED
    fi
    if [ -n "$UP_THRESHOLD" -a ${governor} == "ondemand" ]; then
      adjust_cpufreq ondemand/up_threshold $UP_THRESHOLD
    fi
    if [ -n "$DOWN_THRESHOLD" -a ${governor} == "conservative" ]; then
      adjust_cpufreq conservative/down_threshold $DOWN_THRESHOLD
    fi
    if [ "$IGNORE_NICE" -eq 1 -a ${governor} == "ondemand" -o ${governor} == "conservative" ]; then
      adjust_cpufreq ${governor}/ignore_nice_load $IGNORE_NICE
    fi
    echo -n "Reloading configuration for ${governor}: "
    success; echo
    return 0
  fi
}

case "$1" in
  start)
    start
    ;;

stop)
    stop
    ;;

status)
    is_p4_clockmod && p4status="true"
    if [ "$p4status" == "true" -a "x${GOVERNOR}" == "x" ]; then
      echo "p4-clockmod passive cooling is enabled"
      exit 0
    fi
    governor_module_loaded && module_loaded=true
    if [ -d "$xendir" ]; then
      echo "Frequency scaling not supported under xen kernels"
      RETVAL=0
    elif [ $module_loaded == true -o ${governor} == "performance" ]; then
      echo "Frequency scaling enabled using ${governor} governor"
      RETVAL=0
    else
      status $prog
      RETVAL="$?"
    fi
    ;;

restart|force-reload)
    stop
    start
    ;;

reload)
    reload
    ;;

condrestart|try-restart)
    governor_module_loaded && module_loaded=true
    if [ $module_loaded == true -o -n "`pidof $prog`" -o ${governor} == "performance" ]; then
      stop
      start
    fi
    ;;

*)
    echo $"Usage: $0 {start|stop|restart|condrestart|status}"
    exit 2
    ;;
esac

exit $RETVAL